transmittance

In our earlier study [24], to achieve high IR transmittance and low visible ray (VR) transmittance necessary for a high-performance IR lens, an experimental investigation of injection molding and injection press molding was conducted using a disk-shaped mold cavity that was finished to a mirror-like surface.

Both BK7 glass and silicon wafer were employed as coating substrates, where the former was used for measuring the transmittance and residual stress of ITO thin films and the latter for measuring the other properties.

Transmittance. Transmittance defines the property that a substance permits transmitted light to pass through, while incident light is partially absorbed or scattered.

The experimental results of transmittance and optical haze ratio are well consistent with the expectation.

The band gaps of Sn doped thinfilm have been calculated using the transmittance spectra at different no of coatings.

The FSS ground has good light transmittance and can reflect the electromagnetic waves radiated from the antenna totally and achieve directional radiation.

Its sheet resistance was as low as 9-13 [OMEGA] x [sq.sup.-1] and average transmittance over the visible spectral range of 400-800 nm was 83-85% with a maximum transmittance of 94% [20].

For example, the film thickness, although we are not going to measure it directly, is of great relevance, the bigger will be, it will indicate considerable quantity of material layers, therefore a low film transmittance, because there are much material that is absorbing light, but, for this same reason, there will be more connections among the Ag NW, getting to improve the final film conductivity (less sheet resistance).

Horizontal illuminance on the desks due to light transmittance through the light shelf was also accounted for.

If thickness of non metal coating increases, reflectance of multilayer decreases and transmittance increases [2].

LG's has also developed a new transparent OLED panel which makes images less hazy by increasing the light transmittance to 30 percent, compared to 10 percent common among current transparent LCD displays.