rotary-encoders

RotaryEncoder Arduino Library

MicroPython module to read a rotary encoder.

Rotary encoders, fully debounced switches, EEPROM support on Arduino and mbed - direct and over I2C

Flip-Clock smart alarm-clock

The EncoderTool is a library to manage and read out rotary encoders connected either directly or via multiplexers to ARM based boards. Encoder push buttons are supported. Callback functions can be attached to encoder changes and button presses to allow for event driven applications

Lotsa Rotary Encoders on a Raspberry Pi Pico

SimpleRotary is a Arduino library for using basic bare-bones type rotary encoders. Usually these are the cheap ones without the breakout board. - Getting rotary encoder rotation direction. - Getting rotary select button press. - Getting rotary select button long press. - Getting rotary select button press time. - Basic debouncing of rotary / but…

This is a clever little breakout board for both the RGB and R/G illuminated rotary encoders.

DigitalIO library for Arduino Version 2.x

Macro keyboard with 1x joystick and 2x LED encoders

A simple module for using KY040 and similar rotary encoders on the Raspberry Pi

A simple mod that adds Cessna 150/172 switches to Logitech Saitek yoke system.

This project was used alongside studying my Engineering degree specialising in Electronics to learn about control theory and physics in a practical way.

Simple, small rotary encoder library

cool arduino rotary encoder library is driving the KY-040 type with button in an absolute minimal way.

🏁 🚥 Code to use an Arduino Uno micro-controller with rotary encoders for DIY virtual sim button boxes. Happy Simming!

Experimental code for rotary encoders.

Rotary-Encoder Hardware Peripheral and Firware to Drive it

Goniometric imaging software