Permalink
The final part of "parallel checkout". * mt/parallel-checkout-part-3: ci: run test round with parallel-checkout enabled parallel-checkout: add tests related to .gitattributes t0028: extract encoding helpers to lib-encoding.sh parallel-checkout: add tests related to path collisions parallel-checkout: add tests for basic operations checkout-index: add parallel checkout support builtin/checkout.c: complete parallel checkout support make_transient_cache_entry(): optionally alloc from mem_pool
1896 lines (1680 sloc)
66.2 KB
| #ifndef CACHE_H | |
| #define CACHE_H | |
| #include "git-compat-util.h" | |
| #include "strbuf.h" | |
| #include "hashmap.h" | |
| #include "list.h" | |
| #include "advice.h" | |
| #include "gettext.h" | |
| #include "convert.h" | |
| #include "trace.h" | |
| #include "trace2.h" | |
| #include "string-list.h" | |
| #include "pack-revindex.h" | |
| #include "hash.h" | |
| #include "path.h" | |
| #include "oid-array.h" | |
| #include "repository.h" | |
| #include "mem-pool.h" | |
| #include <zlib.h> | |
| typedef struct git_zstream { | |
| z_stream z; | |
| unsigned long avail_in; | |
| unsigned long avail_out; | |
| unsigned long total_in; | |
| unsigned long total_out; | |
| unsigned char *next_in; | |
| unsigned char *next_out; | |
| } git_zstream; | |
| void git_inflate_init(git_zstream *); | |
| void git_inflate_init_gzip_only(git_zstream *); | |
| void git_inflate_end(git_zstream *); | |
| int git_inflate(git_zstream *, int flush); | |
| void git_deflate_init(git_zstream *, int level); | |
| void git_deflate_init_gzip(git_zstream *, int level); | |
| void git_deflate_init_raw(git_zstream *, int level); | |
| void git_deflate_end(git_zstream *); | |
| int git_deflate_abort(git_zstream *); | |
| int git_deflate_end_gently(git_zstream *); | |
| int git_deflate(git_zstream *, int flush); | |
| unsigned long git_deflate_bound(git_zstream *, unsigned long); | |
| #if defined(DT_UNKNOWN) && !defined(NO_D_TYPE_IN_DIRENT) | |
| #define DTYPE(de) ((de)->d_type) | |
| #else | |
| #undef DT_UNKNOWN | |
| #undef DT_DIR | |
| #undef DT_REG | |
| #undef DT_LNK | |
| #define DT_UNKNOWN 0 | |
| #define DT_DIR 1 | |
| #define DT_REG 2 | |
| #define DT_LNK 3 | |
| #define DTYPE(de) DT_UNKNOWN | |
| #endif | |
| /* unknown mode (impossible combination S_IFIFO|S_IFCHR) */ | |
| #define S_IFINVALID 0030000 | |
| /* | |
| * A "directory link" is a link to another git directory. | |
| * | |
| * The value 0160000 is not normally a valid mode, and | |
| * also just happens to be S_IFDIR + S_IFLNK | |
| */ | |
| #define S_IFGITLINK 0160000 | |
| #define S_ISGITLINK(m) (((m) & S_IFMT) == S_IFGITLINK) | |
| /* | |
| * Some mode bits are also used internally for computations. | |
| * | |
| * They *must* not overlap with any valid modes, and they *must* not be emitted | |
| * to outside world - i.e. appear on disk or network. In other words, it's just | |
| * temporary fields, which we internally use, but they have to stay in-house. | |
| * | |
| * ( such approach is valid, as standard S_IF* fits into 16 bits, and in Git | |
| * codebase mode is `unsigned int` which is assumed to be at least 32 bits ) | |
| */ | |
| /* used internally in tree-diff */ | |
| #define S_DIFFTREE_IFXMIN_NEQ 0x80000000 | |
| /* | |
| * Intensive research over the course of many years has shown that | |
| * port 9418 is totally unused by anything else. Or | |
| * | |
| * Your search - "port 9418" - did not match any documents. | |
| * | |
| * as www.google.com puts it. | |
| * | |
| * This port has been properly assigned for git use by IANA: | |
| * git (Assigned-9418) [I06-050728-0001]. | |
| * | |
| * git 9418/tcp git pack transfer service | |
| * git 9418/udp git pack transfer service | |
| * | |
| * with Linus Torvalds <torvalds@osdl.org> as the point of | |
| * contact. September 2005. | |
| * | |
| * See http://www.iana.org/assignments/port-numbers | |
| */ | |
| #define DEFAULT_GIT_PORT 9418 | |
| /* | |
| * Basic data structures for the directory cache | |
| */ | |
| #define CACHE_SIGNATURE 0x44495243 /* "DIRC" */ | |
| struct cache_header { | |
| uint32_t hdr_signature; | |
| uint32_t hdr_version; | |
| uint32_t hdr_entries; | |
| }; | |
| #define INDEX_FORMAT_LB 2 | |
| #define INDEX_FORMAT_UB 4 | |
| /* | |
| * The "cache_time" is just the low 32 bits of the | |
| * time. It doesn't matter if it overflows - we only | |
| * check it for equality in the 32 bits we save. | |
| */ | |
| struct cache_time { | |
| uint32_t sec; | |
| uint32_t nsec; | |
| }; | |
| struct stat_data { | |
| struct cache_time sd_ctime; | |
| struct cache_time sd_mtime; | |
| unsigned int sd_dev; | |
| unsigned int sd_ino; | |
| unsigned int sd_uid; | |
| unsigned int sd_gid; | |
| unsigned int sd_size; | |
| }; | |
| struct cache_entry { | |
| struct hashmap_entry ent; | |
| struct stat_data ce_stat_data; | |
| unsigned int ce_mode; | |
| unsigned int ce_flags; | |
| unsigned int mem_pool_allocated; | |
| unsigned int ce_namelen; | |
| unsigned int index; /* for link extension */ | |
| struct object_id oid; | |
| char name[FLEX_ARRAY]; /* more */ | |
| }; | |
| #define CE_STAGEMASK (0x3000) | |
| #define CE_EXTENDED (0x4000) | |
| #define CE_VALID (0x8000) | |
| #define CE_STAGESHIFT 12 | |
| /* | |
| * Range 0xFFFF0FFF in ce_flags is divided into | |
| * two parts: in-memory flags and on-disk ones. | |
| * Flags in CE_EXTENDED_FLAGS will get saved on-disk | |
| * if you want to save a new flag, add it in | |
| * CE_EXTENDED_FLAGS | |
| * | |
| * In-memory only flags | |
| */ | |
| #define CE_UPDATE (1 << 16) | |
| #define CE_REMOVE (1 << 17) | |
| #define CE_UPTODATE (1 << 18) | |
| #define CE_ADDED (1 << 19) | |
| #define CE_HASHED (1 << 20) | |
| #define CE_FSMONITOR_VALID (1 << 21) | |
| #define CE_WT_REMOVE (1 << 22) /* remove in work directory */ | |
| #define CE_CONFLICTED (1 << 23) | |
| #define CE_UNPACKED (1 << 24) | |
| #define CE_NEW_SKIP_WORKTREE (1 << 25) | |
| /* used to temporarily mark paths matched by pathspecs */ | |
| #define CE_MATCHED (1 << 26) | |
| #define CE_UPDATE_IN_BASE (1 << 27) | |
| #define CE_STRIP_NAME (1 << 28) | |
| /* | |
| * Extended on-disk flags | |
| */ | |
| #define CE_INTENT_TO_ADD (1 << 29) | |
| #define CE_SKIP_WORKTREE (1 << 30) | |
| /* CE_EXTENDED2 is for future extension */ | |
| #define CE_EXTENDED2 (1U << 31) | |
| #define CE_EXTENDED_FLAGS (CE_INTENT_TO_ADD | CE_SKIP_WORKTREE) | |
| /* | |
| * Safeguard to avoid saving wrong flags: | |
| * - CE_EXTENDED2 won't get saved until its semantic is known | |
| * - Bits in 0x0000FFFF have been saved in ce_flags already | |
| * - Bits in 0x003F0000 are currently in-memory flags | |
| */ | |
| #if CE_EXTENDED_FLAGS & 0x803FFFFF | |
| #error "CE_EXTENDED_FLAGS out of range" | |
| #endif | |
| #define S_ISSPARSEDIR(m) ((m) == S_IFDIR) | |
| /* Forward structure decls */ | |
| struct pathspec; | |
| struct child_process; | |
| struct tree; | |
| /* | |
| * Copy the sha1 and stat state of a cache entry from one to | |
| * another. But we never change the name, or the hash state! | |
| */ | |
| static inline void copy_cache_entry(struct cache_entry *dst, | |
| const struct cache_entry *src) | |
| { | |
| unsigned int state = dst->ce_flags & CE_HASHED; | |
| int mem_pool_allocated = dst->mem_pool_allocated; | |
| /* Don't copy hash chain and name */ | |
| memcpy(&dst->ce_stat_data, &src->ce_stat_data, | |
| offsetof(struct cache_entry, name) - | |
| offsetof(struct cache_entry, ce_stat_data)); | |
| /* Restore the hash state */ | |
| dst->ce_flags = (dst->ce_flags & ~CE_HASHED) | state; | |
| /* Restore the mem_pool_allocated flag */ | |
| dst->mem_pool_allocated = mem_pool_allocated; | |
| } | |
| static inline unsigned create_ce_flags(unsigned stage) | |
| { | |
| return (stage << CE_STAGESHIFT); | |
| } | |
| #define ce_namelen(ce) ((ce)->ce_namelen) | |
| #define ce_size(ce) cache_entry_size(ce_namelen(ce)) | |
| #define ce_stage(ce) ((CE_STAGEMASK & (ce)->ce_flags) >> CE_STAGESHIFT) | |
| #define ce_uptodate(ce) ((ce)->ce_flags & CE_UPTODATE) | |
| #define ce_skip_worktree(ce) ((ce)->ce_flags & CE_SKIP_WORKTREE) | |
| #define ce_mark_uptodate(ce) ((ce)->ce_flags |= CE_UPTODATE) | |
| #define ce_intent_to_add(ce) ((ce)->ce_flags & CE_INTENT_TO_ADD) | |
| #define ce_permissions(mode) (((mode) & 0100) ? 0755 : 0644) | |
| static inline unsigned int create_ce_mode(unsigned int mode) | |
| { | |
| if (S_ISLNK(mode)) | |
| return S_IFLNK; | |
| if (S_ISSPARSEDIR(mode)) | |
| return S_IFDIR; | |
| if (S_ISDIR(mode) || S_ISGITLINK(mode)) | |
| return S_IFGITLINK; | |
| return S_IFREG | ce_permissions(mode); | |
| } | |
| static inline unsigned int ce_mode_from_stat(const struct cache_entry *ce, | |
| unsigned int mode) | |
| { | |
| extern int trust_executable_bit, has_symlinks; | |
| if (!has_symlinks && S_ISREG(mode) && | |
| ce && S_ISLNK(ce->ce_mode)) | |
| return ce->ce_mode; | |
| if (!trust_executable_bit && S_ISREG(mode)) { | |
| if (ce && S_ISREG(ce->ce_mode)) | |
| return ce->ce_mode; | |
| return create_ce_mode(0666); | |
| } | |
| return create_ce_mode(mode); | |
| } | |
| static inline int ce_to_dtype(const struct cache_entry *ce) | |
| { | |
| unsigned ce_mode = ntohl(ce->ce_mode); | |
| if (S_ISREG(ce_mode)) | |
| return DT_REG; | |
| else if (S_ISDIR(ce_mode) || S_ISGITLINK(ce_mode)) | |
| return DT_DIR; | |
| else if (S_ISLNK(ce_mode)) | |
| return DT_LNK; | |
| else | |
| return DT_UNKNOWN; | |
| } | |
| static inline unsigned int canon_mode(unsigned int mode) | |
| { | |
| if (S_ISREG(mode)) | |
| return S_IFREG | ce_permissions(mode); | |
| if (S_ISLNK(mode)) | |
| return S_IFLNK; | |
| if (S_ISDIR(mode)) | |
| return S_IFDIR; | |
| return S_IFGITLINK; | |
| } | |
| #define cache_entry_size(len) (offsetof(struct cache_entry,name) + (len) + 1) | |
| #define SOMETHING_CHANGED (1 << 0) /* unclassified changes go here */ | |
| #define CE_ENTRY_CHANGED (1 << 1) | |
| #define CE_ENTRY_REMOVED (1 << 2) | |
| #define CE_ENTRY_ADDED (1 << 3) | |
| #define RESOLVE_UNDO_CHANGED (1 << 4) | |
| #define CACHE_TREE_CHANGED (1 << 5) | |
| #define SPLIT_INDEX_ORDERED (1 << 6) | |
| #define UNTRACKED_CHANGED (1 << 7) | |
| #define FSMONITOR_CHANGED (1 << 8) | |
| struct split_index; | |
| struct untracked_cache; | |
| struct progress; | |
| struct pattern_list; | |
| struct index_state { | |
| struct cache_entry **cache; | |
| unsigned int version; | |
| unsigned int cache_nr, cache_alloc, cache_changed; | |
| struct string_list *resolve_undo; | |
| struct cache_tree *cache_tree; | |
| struct split_index *split_index; | |
| struct cache_time timestamp; | |
| unsigned name_hash_initialized : 1, | |
| initialized : 1, | |
| drop_cache_tree : 1, | |
| updated_workdir : 1, | |
| updated_skipworktree : 1, | |
| fsmonitor_has_run_once : 1, | |
| /* | |
| * sparse_index == 1 when sparse-directory | |
| * entries exist. Requires sparse-checkout | |
| * in cone mode. | |
| */ | |
| sparse_index : 1; | |
| struct hashmap name_hash; | |
| struct hashmap dir_hash; | |
| struct object_id oid; | |
| struct untracked_cache *untracked; | |
| char *fsmonitor_last_update; | |
| struct ewah_bitmap *fsmonitor_dirty; | |
| struct mem_pool *ce_mem_pool; | |
| struct progress *progress; | |
| struct repository *repo; | |
| struct pattern_list *sparse_checkout_patterns; | |
| }; | |
| /* Name hashing */ | |
| int test_lazy_init_name_hash(struct index_state *istate, int try_threaded); | |
| void add_name_hash(struct index_state *istate, struct cache_entry *ce); | |
| void remove_name_hash(struct index_state *istate, struct cache_entry *ce); | |
| void free_name_hash(struct index_state *istate); | |
| void ensure_full_index(struct index_state *istate); | |
| /* Cache entry creation and cleanup */ | |
| /* | |
| * Create cache_entry intended for use in the specified index. Caller | |
| * is responsible for discarding the cache_entry with | |
| * `discard_cache_entry`. | |
| */ | |
| struct cache_entry *make_cache_entry(struct index_state *istate, | |
| unsigned int mode, | |
| const struct object_id *oid, | |
| const char *path, | |
| int stage, | |
| unsigned int refresh_options); | |
| struct cache_entry *make_empty_cache_entry(struct index_state *istate, | |
| size_t name_len); | |
| /* | |
| * Create a cache_entry that is not intended to be added to an index. If | |
| * `ce_mem_pool` is not NULL, the entry is allocated within the given memory | |
| * pool. Caller is responsible for discarding "loose" entries with | |
| * `discard_cache_entry()` and the memory pool with | |
| * `mem_pool_discard(ce_mem_pool, should_validate_cache_entries())`. | |
| */ | |
| struct cache_entry *make_transient_cache_entry(unsigned int mode, | |
| const struct object_id *oid, | |
| const char *path, | |
| int stage, | |
| struct mem_pool *ce_mem_pool); | |
| struct cache_entry *make_empty_transient_cache_entry(size_t len, | |
| struct mem_pool *ce_mem_pool); | |
| /* | |
| * Discard cache entry. | |
| */ | |
| void discard_cache_entry(struct cache_entry *ce); | |
| /* | |
| * Check configuration if we should perform extra validation on cache | |
| * entries. | |
| */ | |
| int should_validate_cache_entries(void); | |
| /* | |
| * Duplicate a cache_entry. Allocate memory for the new entry from a | |
| * memory_pool. Takes into account cache_entry fields that are meant | |
| * for managing the underlying memory allocation of the cache_entry. | |
| */ | |
| struct cache_entry *dup_cache_entry(const struct cache_entry *ce, struct index_state *istate); | |
| /* | |
| * Validate the cache entries in the index. This is an internal | |
| * consistency check that the cache_entry structs are allocated from | |
| * the expected memory pool. | |
| */ | |
| void validate_cache_entries(const struct index_state *istate); | |
| #ifdef USE_THE_INDEX_COMPATIBILITY_MACROS | |
| extern struct index_state the_index; | |
| #define active_cache (the_index.cache) | |
| #define active_nr (the_index.cache_nr) | |
| #define active_alloc (the_index.cache_alloc) | |
| #define active_cache_changed (the_index.cache_changed) | |
| #define active_cache_tree (the_index.cache_tree) | |
| #define read_cache() repo_read_index(the_repository) | |
| #define read_cache_from(path) read_index_from(&the_index, (path), (get_git_dir())) | |
| #define read_cache_preload(pathspec) repo_read_index_preload(the_repository, (pathspec), 0) | |
| #define is_cache_unborn() is_index_unborn(&the_index) | |
| #define read_cache_unmerged() repo_read_index_unmerged(the_repository) | |
| #define discard_cache() discard_index(&the_index) | |
| #define unmerged_cache() unmerged_index(&the_index) | |
| #define cache_name_pos(name, namelen) index_name_pos(&the_index,(name),(namelen)) | |
| #define add_cache_entry(ce, option) add_index_entry(&the_index, (ce), (option)) | |
| #define rename_cache_entry_at(pos, new_name) rename_index_entry_at(&the_index, (pos), (new_name)) | |
| #define remove_cache_entry_at(pos) remove_index_entry_at(&the_index, (pos)) | |
| #define remove_file_from_cache(path) remove_file_from_index(&the_index, (path)) | |
| #define add_to_cache(path, st, flags) add_to_index(&the_index, (path), (st), (flags)) | |
| #define add_file_to_cache(path, flags) add_file_to_index(&the_index, (path), (flags)) | |
| #define chmod_cache_entry(ce, flip) chmod_index_entry(&the_index, (ce), (flip)) | |
| #define refresh_cache(flags) refresh_index(&the_index, (flags), NULL, NULL, NULL) | |
| #define refresh_and_write_cache(refresh_flags, write_flags, gentle) repo_refresh_and_write_index(the_repository, (refresh_flags), (write_flags), (gentle), NULL, NULL, NULL) | |
| #define ce_match_stat(ce, st, options) ie_match_stat(&the_index, (ce), (st), (options)) | |
| #define ce_modified(ce, st, options) ie_modified(&the_index, (ce), (st), (options)) | |
| #define cache_dir_exists(name, namelen) index_dir_exists(&the_index, (name), (namelen)) | |
| #define cache_file_exists(name, namelen, igncase) index_file_exists(&the_index, (name), (namelen), (igncase)) | |
| #define cache_name_is_other(name, namelen) index_name_is_other(&the_index, (name), (namelen)) | |
| #define resolve_undo_clear() resolve_undo_clear_index(&the_index) | |
| #define unmerge_cache_entry_at(at) unmerge_index_entry_at(&the_index, at) | |
| #define unmerge_cache(pathspec) unmerge_index(&the_index, pathspec) | |
| #define read_blob_data_from_cache(path, sz) read_blob_data_from_index(&the_index, (path), (sz)) | |
| #define hold_locked_index(lock_file, flags) repo_hold_locked_index(the_repository, (lock_file), (flags)) | |
| #endif | |
| #define TYPE_BITS 3 | |
| /* | |
| * Values in this enum (except those outside the 3 bit range) are part | |
| * of pack file format. See Documentation/technical/pack-format.txt | |
| * for more information. | |
| */ | |
| enum object_type { | |
| OBJ_BAD = -1, | |
| OBJ_NONE = 0, | |
| OBJ_COMMIT = 1, | |
| OBJ_TREE = 2, | |
| OBJ_BLOB = 3, | |
| OBJ_TAG = 4, | |
| /* 5 for future expansion */ | |
| OBJ_OFS_DELTA = 6, | |
| OBJ_REF_DELTA = 7, | |
| OBJ_ANY, | |
| OBJ_MAX | |
| }; | |
| static inline enum object_type object_type(unsigned int mode) | |
| { | |
| return S_ISDIR(mode) ? OBJ_TREE : | |
| S_ISGITLINK(mode) ? OBJ_COMMIT : | |
| OBJ_BLOB; | |
| } | |
| /* Double-check local_repo_env below if you add to this list. */ | |
| #define GIT_DIR_ENVIRONMENT "GIT_DIR" | |
| #define GIT_COMMON_DIR_ENVIRONMENT "GIT_COMMON_DIR" | |
| #define GIT_NAMESPACE_ENVIRONMENT "GIT_NAMESPACE" | |
| #define GIT_WORK_TREE_ENVIRONMENT "GIT_WORK_TREE" | |
| #define GIT_PREFIX_ENVIRONMENT "GIT_PREFIX" | |
| #define GIT_SUPER_PREFIX_ENVIRONMENT "GIT_INTERNAL_SUPER_PREFIX" | |
| #define DEFAULT_GIT_DIR_ENVIRONMENT ".git" | |
| #define DB_ENVIRONMENT "GIT_OBJECT_DIRECTORY" | |
| #define INDEX_ENVIRONMENT "GIT_INDEX_FILE" | |
| #define GRAFT_ENVIRONMENT "GIT_GRAFT_FILE" | |
| #define GIT_SHALLOW_FILE_ENVIRONMENT "GIT_SHALLOW_FILE" | |
| #define TEMPLATE_DIR_ENVIRONMENT "GIT_TEMPLATE_DIR" | |
| #define CONFIG_ENVIRONMENT "GIT_CONFIG" | |
| #define CONFIG_DATA_ENVIRONMENT "GIT_CONFIG_PARAMETERS" | |
| #define CONFIG_COUNT_ENVIRONMENT "GIT_CONFIG_COUNT" | |
| #define EXEC_PATH_ENVIRONMENT "GIT_EXEC_PATH" | |
| #define CEILING_DIRECTORIES_ENVIRONMENT "GIT_CEILING_DIRECTORIES" | |
| #define NO_REPLACE_OBJECTS_ENVIRONMENT "GIT_NO_REPLACE_OBJECTS" | |
| #define GIT_REPLACE_REF_BASE_ENVIRONMENT "GIT_REPLACE_REF_BASE" | |
| #define GITATTRIBUTES_FILE ".gitattributes" | |
| #define INFOATTRIBUTES_FILE "info/attributes" | |
| #define ATTRIBUTE_MACRO_PREFIX "[attr]" | |
| #define GITMODULES_FILE ".gitmodules" | |
| #define GITMODULES_INDEX ":.gitmodules" | |
| #define GITMODULES_HEAD "HEAD:.gitmodules" | |
| #define GIT_NOTES_REF_ENVIRONMENT "GIT_NOTES_REF" | |
| #define GIT_NOTES_DEFAULT_REF "refs/notes/commits" | |
| #define GIT_NOTES_DISPLAY_REF_ENVIRONMENT "GIT_NOTES_DISPLAY_REF" | |
| #define GIT_NOTES_REWRITE_REF_ENVIRONMENT "GIT_NOTES_REWRITE_REF" | |
| #define GIT_NOTES_REWRITE_MODE_ENVIRONMENT "GIT_NOTES_REWRITE_MODE" | |
| #define GIT_LITERAL_PATHSPECS_ENVIRONMENT "GIT_LITERAL_PATHSPECS" | |
| #define GIT_GLOB_PATHSPECS_ENVIRONMENT "GIT_GLOB_PATHSPECS" | |
| #define GIT_NOGLOB_PATHSPECS_ENVIRONMENT "GIT_NOGLOB_PATHSPECS" | |
| #define GIT_ICASE_PATHSPECS_ENVIRONMENT "GIT_ICASE_PATHSPECS" | |
| #define GIT_QUARANTINE_ENVIRONMENT "GIT_QUARANTINE_PATH" | |
| #define GIT_OPTIONAL_LOCKS_ENVIRONMENT "GIT_OPTIONAL_LOCKS" | |
| #define GIT_TEXT_DOMAIN_DIR_ENVIRONMENT "GIT_TEXTDOMAINDIR" | |
| /* | |
| * Environment variable used in handshaking the wire protocol. | |
| * Contains a colon ':' separated list of keys with optional values | |
| * 'key[=value]'. Presence of unknown keys and values must be | |
| * ignored. | |
| */ | |
| #define GIT_PROTOCOL_ENVIRONMENT "GIT_PROTOCOL" | |
| /* HTTP header used to handshake the wire protocol */ | |
| #define GIT_PROTOCOL_HEADER "Git-Protocol" | |
| /* | |
| * This environment variable is expected to contain a boolean indicating | |
| * whether we should or should not treat: | |
| * | |
| * GIT_DIR=foo.git git ... | |
| * | |
| * as if GIT_WORK_TREE=. was given. It's not expected that users will make use | |
| * of this, but we use it internally to communicate to sub-processes that we | |
| * are in a bare repo. If not set, defaults to true. | |
| */ | |
| #define GIT_IMPLICIT_WORK_TREE_ENVIRONMENT "GIT_IMPLICIT_WORK_TREE" | |
| /* | |
| * Repository-local GIT_* environment variables; these will be cleared | |
| * when git spawns a sub-process that runs inside another repository. | |
| * The array is NULL-terminated, which makes it easy to pass in the "env" | |
| * parameter of a run-command invocation, or to do a simple walk. | |
| */ | |
| extern const char * const local_repo_env[]; | |
| void setup_git_env(const char *git_dir); | |
| /* | |
| * Returns true iff we have a configured git repository (either via | |
| * setup_git_directory, or in the environment via $GIT_DIR). | |
| */ | |
| int have_git_dir(void); | |
| extern int is_bare_repository_cfg; | |
| int is_bare_repository(void); | |
| int is_inside_git_dir(void); | |
| extern char *git_work_tree_cfg; | |
| int is_inside_work_tree(void); | |
| const char *get_git_dir(void); | |
| const char *get_git_common_dir(void); | |
| char *get_object_directory(void); | |
| char *get_index_file(void); | |
| char *get_graft_file(struct repository *r); | |
| void set_git_dir(const char *path, int make_realpath); | |
| int get_common_dir_noenv(struct strbuf *sb, const char *gitdir); | |
| int get_common_dir(struct strbuf *sb, const char *gitdir); | |
| const char *get_git_namespace(void); | |
| const char *strip_namespace(const char *namespaced_ref); | |
| const char *get_super_prefix(void); | |
| const char *get_git_work_tree(void); | |
| /* | |
| * Return true if the given path is a git directory; note that this _just_ | |
| * looks at the directory itself. If you want to know whether "foo/.git" | |
| * is a repository, you must feed that path, not just "foo". | |
| */ | |
| int is_git_directory(const char *path); | |
| /* | |
| * Return 1 if the given path is the root of a git repository or | |
| * submodule, else 0. Will not return 1 for bare repositories with the | |
| * exception of creating a bare repository in "foo/.git" and calling | |
| * is_git_repository("foo"). | |
| * | |
| * If we run into read errors, we err on the side of saying "yes, it is", | |
| * as we usually consider sub-repos precious, and would prefer to err on the | |
| * side of not disrupting or deleting them. | |
| */ | |
| int is_nonbare_repository_dir(struct strbuf *path); | |
| #define READ_GITFILE_ERR_STAT_FAILED 1 | |
| #define READ_GITFILE_ERR_NOT_A_FILE 2 | |
| #define READ_GITFILE_ERR_OPEN_FAILED 3 | |
| #define READ_GITFILE_ERR_READ_FAILED 4 | |
| #define READ_GITFILE_ERR_INVALID_FORMAT 5 | |
| #define READ_GITFILE_ERR_NO_PATH 6 | |
| #define READ_GITFILE_ERR_NOT_A_REPO 7 | |
| #define READ_GITFILE_ERR_TOO_LARGE 8 | |
| void read_gitfile_error_die(int error_code, const char *path, const char *dir); | |
| const char *read_gitfile_gently(const char *path, int *return_error_code); | |
| #define read_gitfile(path) read_gitfile_gently((path), NULL) | |
| const char *resolve_gitdir_gently(const char *suspect, int *return_error_code); | |
| #define resolve_gitdir(path) resolve_gitdir_gently((path), NULL) | |
| void set_git_work_tree(const char *tree); | |
| #define ALTERNATE_DB_ENVIRONMENT "GIT_ALTERNATE_OBJECT_DIRECTORIES" | |
| void setup_work_tree(void); | |
| /* | |
| * Find the commondir and gitdir of the repository that contains the current | |
| * working directory, without changing the working directory or other global | |
| * state. The result is appended to commondir and gitdir. If the discovered | |
| * gitdir does not correspond to a worktree, then 'commondir' and 'gitdir' will | |
| * both have the same result appended to the buffer. The return value is | |
| * either 0 upon success and non-zero if no repository was found. | |
| */ | |
| int discover_git_directory(struct strbuf *commondir, | |
| struct strbuf *gitdir); | |
| const char *setup_git_directory_gently(int *); | |
| const char *setup_git_directory(void); | |
| char *prefix_path(const char *prefix, int len, const char *path); | |
| char *prefix_path_gently(const char *prefix, int len, int *remaining, const char *path); | |
| /* | |
| * Concatenate "prefix" (if len is non-zero) and "path", with no | |
| * connecting characters (so "prefix" should end with a "/"). | |
| * Unlike prefix_path, this should be used if the named file does | |
| * not have to interact with index entry; i.e. name of a random file | |
| * on the filesystem. | |
| * | |
| * The return value is always a newly allocated string (even if the | |
| * prefix was empty). | |
| */ | |
| char *prefix_filename(const char *prefix, const char *path); | |
| int check_filename(const char *prefix, const char *name); | |
| void verify_filename(const char *prefix, | |
| const char *name, | |
| int diagnose_misspelt_rev); | |
| void verify_non_filename(const char *prefix, const char *name); | |
| int path_inside_repo(const char *prefix, const char *path); | |
| #define INIT_DB_QUIET 0x0001 | |
| #define INIT_DB_EXIST_OK 0x0002 | |
| int init_db(const char *git_dir, const char *real_git_dir, | |
| const char *template_dir, int hash_algo, | |
| const char *initial_branch, unsigned int flags); | |
| void initialize_repository_version(int hash_algo, int reinit); | |
| void sanitize_stdfds(void); | |
| int daemonize(void); | |
| #define alloc_nr(x) (((x)+16)*3/2) | |
| /** | |
| * Dynamically growing an array using realloc() is error prone and boring. | |
| * | |
| * Define your array with: | |
| * | |
| * - a pointer (`item`) that points at the array, initialized to `NULL` | |
| * (although please name the variable based on its contents, not on its | |
| * type); | |
| * | |
| * - an integer variable (`alloc`) that keeps track of how big the current | |
| * allocation is, initialized to `0`; | |
| * | |
| * - another integer variable (`nr`) to keep track of how many elements the | |
| * array currently has, initialized to `0`. | |
| * | |
| * Then before adding `n`th element to the item, call `ALLOC_GROW(item, n, | |
| * alloc)`. This ensures that the array can hold at least `n` elements by | |
| * calling `realloc(3)` and adjusting `alloc` variable. | |
| * | |
| * ------------ | |
| * sometype *item; | |
| * size_t nr; | |
| * size_t alloc | |
| * | |
| * for (i = 0; i < nr; i++) | |
| * if (we like item[i] already) | |
| * return; | |
| * | |
| * // we did not like any existing one, so add one | |
| * ALLOC_GROW(item, nr + 1, alloc); | |
| * item[nr++] = value you like; | |
| * ------------ | |
| * | |
| * You are responsible for updating the `nr` variable. | |
| * | |
| * If you need to specify the number of elements to allocate explicitly | |
| * then use the macro `REALLOC_ARRAY(item, alloc)` instead of `ALLOC_GROW`. | |
| * | |
| * Consider using ALLOC_GROW_BY instead of ALLOC_GROW as it has some | |
| * added niceties. | |
| * | |
| * DO NOT USE any expression with side-effect for 'x', 'nr', or 'alloc'. | |
| */ | |
| #define ALLOC_GROW(x, nr, alloc) \ | |
| do { \ | |
| if ((nr) > alloc) { \ | |
| if (alloc_nr(alloc) < (nr)) \ | |
| alloc = (nr); \ | |
| else \ | |
| alloc = alloc_nr(alloc); \ | |
| REALLOC_ARRAY(x, alloc); \ | |
| } \ | |
| } while (0) | |
| /* | |
| * Similar to ALLOC_GROW but handles updating of the nr value and | |
| * zeroing the bytes of the newly-grown array elements. | |
| * | |
| * DO NOT USE any expression with side-effect for any of the | |
| * arguments. | |
| */ | |
| #define ALLOC_GROW_BY(x, nr, increase, alloc) \ | |
| do { \ | |
| if (increase) { \ | |
| size_t new_nr = nr + (increase); \ | |
| if (new_nr < nr) \ | |
| BUG("negative growth in ALLOC_GROW_BY"); \ | |
| ALLOC_GROW(x, new_nr, alloc); \ | |
| memset((x) + nr, 0, sizeof(*(x)) * (increase)); \ | |
| nr = new_nr; \ | |
| } \ | |
| } while (0) | |
| /* Initialize and use the cache information */ | |
| struct lock_file; | |
| void preload_index(struct index_state *index, | |
| const struct pathspec *pathspec, | |
| unsigned int refresh_flags); | |
| int do_read_index(struct index_state *istate, const char *path, | |
| int must_exist); /* for testting only! */ | |
| int read_index_from(struct index_state *, const char *path, | |
| const char *gitdir); | |
| int is_index_unborn(struct index_state *); | |
| void ensure_full_index(struct index_state *istate); | |
| /* For use with `write_locked_index()`. */ | |
| #define COMMIT_LOCK (1 << 0) | |
| #define SKIP_IF_UNCHANGED (1 << 1) | |
| /* | |
| * Write the index while holding an already-taken lock. Close the lock, | |
| * and if `COMMIT_LOCK` is given, commit it. | |
| * | |
| * Unless a split index is in use, write the index into the lockfile. | |
| * | |
| * With a split index, write the shared index to a temporary file, | |
| * adjust its permissions and rename it into place, then write the | |
| * split index to the lockfile. If the temporary file for the shared | |
| * index cannot be created, fall back to the behavior described in | |
| * the previous paragraph. | |
| * | |
| * With `COMMIT_LOCK`, the lock is always committed or rolled back. | |
| * Without it, the lock is closed, but neither committed nor rolled | |
| * back. | |
| * | |
| * If `SKIP_IF_UNCHANGED` is given and the index is unchanged, nothing | |
| * is written (and the lock is rolled back if `COMMIT_LOCK` is given). | |
| */ | |
| int write_locked_index(struct index_state *, struct lock_file *lock, unsigned flags); | |
| int discard_index(struct index_state *); | |
| void move_index_extensions(struct index_state *dst, struct index_state *src); | |
| int unmerged_index(const struct index_state *); | |
| /** | |
| * Returns 1 if istate differs from tree, 0 otherwise. If tree is NULL, | |
| * compares istate to HEAD. If tree is NULL and on an unborn branch, | |
| * returns 1 if there are entries in istate, 0 otherwise. If an strbuf is | |
| * provided, the space-separated list of files that differ will be appended | |
| * to it. | |
| */ | |
| int repo_index_has_changes(struct repository *repo, | |
| struct tree *tree, | |
| struct strbuf *sb); | |
| int verify_path(const char *path, unsigned mode); | |
| int strcmp_offset(const char *s1, const char *s2, size_t *first_change); | |
| int index_dir_exists(struct index_state *istate, const char *name, int namelen); | |
| void adjust_dirname_case(struct index_state *istate, char *name); | |
| struct cache_entry *index_file_exists(struct index_state *istate, const char *name, int namelen, int igncase); | |
| /* | |
| * Searches for an entry defined by name and namelen in the given index. | |
| * If the return value is positive (including 0) it is the position of an | |
| * exact match. If the return value is negative, the negated value minus 1 | |
| * is the position where the entry would be inserted. | |
| * Example: The current index consists of these files and its stages: | |
| * | |
| * b#0, d#0, f#1, f#3 | |
| * | |
| * index_name_pos(&index, "a", 1) -> -1 | |
| * index_name_pos(&index, "b", 1) -> 0 | |
| * index_name_pos(&index, "c", 1) -> -2 | |
| * index_name_pos(&index, "d", 1) -> 1 | |
| * index_name_pos(&index, "e", 1) -> -3 | |
| * index_name_pos(&index, "f", 1) -> -3 | |
| * index_name_pos(&index, "g", 1) -> -5 | |
| */ | |
| int index_name_pos(struct index_state *, const char *name, int namelen); | |
| /* | |
| * Some functions return the negative complement of an insert position when a | |
| * precise match was not found but a position was found where the entry would | |
| * need to be inserted. This helper protects that logic from any integer | |
| * underflow. | |
| */ | |
| static inline int index_pos_to_insert_pos(uintmax_t pos) | |
| { | |
| if (pos > INT_MAX) | |
| die("overflow: -1 - %"PRIuMAX, pos); | |
| return -1 - (int)pos; | |
| } | |
| #define ADD_CACHE_OK_TO_ADD 1 /* Ok to add */ | |
| #define ADD_CACHE_OK_TO_REPLACE 2 /* Ok to replace file/directory */ | |
| #define ADD_CACHE_SKIP_DFCHECK 4 /* Ok to skip DF conflict checks */ | |
| #define ADD_CACHE_JUST_APPEND 8 /* Append only */ | |
| #define ADD_CACHE_NEW_ONLY 16 /* Do not replace existing ones */ | |
| #define ADD_CACHE_KEEP_CACHE_TREE 32 /* Do not invalidate cache-tree */ | |
| #define ADD_CACHE_RENORMALIZE 64 /* Pass along HASH_RENORMALIZE */ | |
| int add_index_entry(struct index_state *, struct cache_entry *ce, int option); | |
| void rename_index_entry_at(struct index_state *, int pos, const char *new_name); | |
| /* Remove entry, return true if there are more entries to go. */ | |
| int remove_index_entry_at(struct index_state *, int pos); | |
| void remove_marked_cache_entries(struct index_state *istate, int invalidate); | |
| int remove_file_from_index(struct index_state *, const char *path); | |
| #define ADD_CACHE_VERBOSE 1 | |
| #define ADD_CACHE_PRETEND 2 | |
| #define ADD_CACHE_IGNORE_ERRORS 4 | |
| #define ADD_CACHE_IGNORE_REMOVAL 8 | |
| #define ADD_CACHE_INTENT 16 | |
| /* | |
| * These two are used to add the contents of the file at path | |
| * to the index, marking the working tree up-to-date by storing | |
| * the cached stat info in the resulting cache entry. A caller | |
| * that has already run lstat(2) on the path can call | |
| * add_to_index(), and all others can call add_file_to_index(); | |
| * the latter will do necessary lstat(2) internally before | |
| * calling the former. | |
| */ | |
| int add_to_index(struct index_state *, const char *path, struct stat *, int flags); | |
| int add_file_to_index(struct index_state *, const char *path, int flags); | |
| int chmod_index_entry(struct index_state *, struct cache_entry *ce, char flip); | |
| int ce_same_name(const struct cache_entry *a, const struct cache_entry *b); | |
| void set_object_name_for_intent_to_add_entry(struct cache_entry *ce); | |
| int index_name_is_other(struct index_state *, const char *, int); | |
| void *read_blob_data_from_index(struct index_state *, const char *, unsigned long *); | |
| /* do stat comparison even if CE_VALID is true */ | |
| #define CE_MATCH_IGNORE_VALID 01 | |
| /* do not check the contents but report dirty on racily-clean entries */ | |
| #define CE_MATCH_RACY_IS_DIRTY 02 | |
| /* do stat comparison even if CE_SKIP_WORKTREE is true */ | |
| #define CE_MATCH_IGNORE_SKIP_WORKTREE 04 | |
| /* ignore non-existent files during stat update */ | |
| #define CE_MATCH_IGNORE_MISSING 0x08 | |
| /* enable stat refresh */ | |
| #define CE_MATCH_REFRESH 0x10 | |
| /* don't refresh_fsmonitor state or do stat comparison even if CE_FSMONITOR_VALID is true */ | |
| #define CE_MATCH_IGNORE_FSMONITOR 0X20 | |
| int is_racy_timestamp(const struct index_state *istate, | |
| const struct cache_entry *ce); | |
| int ie_match_stat(struct index_state *, const struct cache_entry *, struct stat *, unsigned int); | |
| int ie_modified(struct index_state *, const struct cache_entry *, struct stat *, unsigned int); | |
| #define HASH_WRITE_OBJECT 1 | |
| #define HASH_FORMAT_CHECK 2 | |
| #define HASH_RENORMALIZE 4 | |
| int index_fd(struct index_state *istate, struct object_id *oid, int fd, struct stat *st, enum object_type type, const char *path, unsigned flags); | |
| int index_path(struct index_state *istate, struct object_id *oid, const char *path, struct stat *st, unsigned flags); | |
| /* | |
| * Record to sd the data from st that we use to check whether a file | |
| * might have changed. | |
| */ | |
| void fill_stat_data(struct stat_data *sd, struct stat *st); | |
| /* | |
| * Return 0 if st is consistent with a file not having been changed | |
| * since sd was filled. If there are differences, return a | |
| * combination of MTIME_CHANGED, CTIME_CHANGED, OWNER_CHANGED, | |
| * INODE_CHANGED, and DATA_CHANGED. | |
| */ | |
| int match_stat_data(const struct stat_data *sd, struct stat *st); | |
| int match_stat_data_racy(const struct index_state *istate, | |
| const struct stat_data *sd, struct stat *st); | |
| void fill_stat_cache_info(struct index_state *istate, struct cache_entry *ce, struct stat *st); | |
| #define REFRESH_REALLY (1 << 0) /* ignore_valid */ | |
| #define REFRESH_UNMERGED (1 << 1) /* allow unmerged */ | |
| #define REFRESH_QUIET (1 << 2) /* be quiet about it */ | |
| #define REFRESH_IGNORE_MISSING (1 << 3) /* ignore non-existent */ | |
| #define REFRESH_IGNORE_SUBMODULES (1 << 4) /* ignore submodules */ | |
| #define REFRESH_IN_PORCELAIN (1 << 5) /* user friendly output, not "needs update" */ | |
| #define REFRESH_PROGRESS (1 << 6) /* show progress bar if stderr is tty */ | |
| #define REFRESH_IGNORE_SKIP_WORKTREE (1 << 7) /* ignore skip_worktree entries */ | |
| int refresh_index(struct index_state *, unsigned int flags, const struct pathspec *pathspec, char *seen, const char *header_msg); | |
| /* | |
| * Refresh the index and write it to disk. | |
| * | |
| * 'refresh_flags' is passed directly to 'refresh_index()', while | |
| * 'COMMIT_LOCK | write_flags' is passed to 'write_locked_index()', so | |
| * the lockfile is always either committed or rolled back. | |
| * | |
| * If 'gentle' is passed, errors locking the index are ignored. | |
| * | |
| * Return 1 if refreshing the index returns an error, -1 if writing | |
| * the index to disk fails, 0 on success. | |
| * | |
| * Note that if refreshing the index returns an error, we still write | |
| * out the index (unless locking fails). | |
| */ | |
| int repo_refresh_and_write_index(struct repository*, unsigned int refresh_flags, unsigned int write_flags, int gentle, const struct pathspec *, char *seen, const char *header_msg); | |
| struct cache_entry *refresh_cache_entry(struct index_state *, struct cache_entry *, unsigned int); | |
| void set_alternate_index_output(const char *); | |
| extern int verify_index_checksum; | |
| extern int verify_ce_order; | |
| /* Environment bits from configuration mechanism */ | |
| extern int trust_executable_bit; | |
| extern int trust_ctime; | |
| extern int check_stat; | |
| extern int quote_path_fully; | |
| extern int has_symlinks; | |
| extern int minimum_abbrev, default_abbrev; | |
| extern int ignore_case; | |
| extern int assume_unchanged; | |
| extern int prefer_symlink_refs; | |
| extern int warn_ambiguous_refs; | |
| extern int warn_on_object_refname_ambiguity; | |
| extern char *apply_default_whitespace; | |
| extern char *apply_default_ignorewhitespace; | |
| extern const char *git_attributes_file; | |
| extern const char *git_hooks_path; | |
| extern int zlib_compression_level; | |
| extern int core_compression_level; | |
| extern int pack_compression_level; | |
| extern size_t packed_git_window_size; | |
| extern size_t packed_git_limit; | |
| extern size_t delta_base_cache_limit; | |
| extern unsigned long big_file_threshold; | |
| extern unsigned long pack_size_limit_cfg; | |
| /* | |
| * Accessors for the core.sharedrepository config which lazy-load the value | |
| * from the config (if not already set). The "reset" function can be | |
| * used to unset "set" or cached value, meaning that the value will be loaded | |
| * fresh from the config file on the next call to get_shared_repository(). | |
| */ | |
| void set_shared_repository(int value); | |
| int get_shared_repository(void); | |
| void reset_shared_repository(void); | |
| /* | |
| * Do replace refs need to be checked this run? This variable is | |
| * initialized to true unless --no-replace-object is used or | |
| * $GIT_NO_REPLACE_OBJECTS is set, but is set to false by some | |
| * commands that do not want replace references to be active. | |
| */ | |
| extern int read_replace_refs; | |
| extern char *git_replace_ref_base; | |
| extern int fsync_object_files; | |
| extern int core_preload_index; | |
| extern int precomposed_unicode; | |
| extern int protect_hfs; | |
| extern int protect_ntfs; | |
| extern const char *core_fsmonitor; | |
| extern int core_apply_sparse_checkout; | |
| extern int core_sparse_checkout_cone; | |
| /* | |
| * Include broken refs in all ref iterations, which will | |
| * generally choke dangerous operations rather than letting | |
| * them silently proceed without taking the broken ref into | |
| * account. | |
| */ | |
| extern int ref_paranoia; | |
| /* | |
| * Returns the boolean value of $GIT_OPTIONAL_LOCKS (or the default value). | |
| */ | |
| int use_optional_locks(void); | |
| /* | |
| * The character that begins a commented line in user-editable file | |
| * that is subject to stripspace. | |
| */ | |
| extern char comment_line_char; | |
| extern int auto_comment_line_char; | |
| enum log_refs_config { | |
| LOG_REFS_UNSET = -1, | |
| LOG_REFS_NONE = 0, | |
| LOG_REFS_NORMAL, | |
| LOG_REFS_ALWAYS | |
| }; | |
| extern enum log_refs_config log_all_ref_updates; | |
| enum rebase_setup_type { | |
| AUTOREBASE_NEVER = 0, | |
| AUTOREBASE_LOCAL, | |
| AUTOREBASE_REMOTE, | |
| AUTOREBASE_ALWAYS | |
| }; | |
| enum push_default_type { | |
| PUSH_DEFAULT_NOTHING = 0, | |
| PUSH_DEFAULT_MATCHING, | |
| PUSH_DEFAULT_SIMPLE, | |
| PUSH_DEFAULT_UPSTREAM, | |
| PUSH_DEFAULT_CURRENT, | |
| PUSH_DEFAULT_UNSPECIFIED | |
| }; | |
| extern enum rebase_setup_type autorebase; | |
| extern enum push_default_type push_default; | |
| enum object_creation_mode { | |
| OBJECT_CREATION_USES_HARDLINKS = 0, | |
| OBJECT_CREATION_USES_RENAMES = 1 | |
| }; | |
| extern enum object_creation_mode object_creation_mode; | |
| extern char *notes_ref_name; | |
| extern int grafts_replace_parents; | |
| /* | |
| * GIT_REPO_VERSION is the version we write by default. The | |
| * _READ variant is the highest number we know how to | |
| * handle. | |
| */ | |
| #define GIT_REPO_VERSION 0 | |
| #define GIT_REPO_VERSION_READ 1 | |
| extern int repository_format_precious_objects; | |
| extern int repository_format_worktree_config; | |
| /* | |
| * You _have_ to initialize a `struct repository_format` using | |
| * `= REPOSITORY_FORMAT_INIT` before calling `read_repository_format()`. | |
| */ | |
| struct repository_format { | |
| int version; | |
| int precious_objects; | |
| char *partial_clone; /* value of extensions.partialclone */ | |
| int worktree_config; | |
| int is_bare; | |
| int hash_algo; | |
| int sparse_index; | |
| char *work_tree; | |
| struct string_list unknown_extensions; | |
| struct string_list v1_only_extensions; | |
| }; | |
| /* | |
| * Always use this to initialize a `struct repository_format` | |
| * to a well-defined, default state before calling | |
| * `read_repository()`. | |
| */ | |
| #define REPOSITORY_FORMAT_INIT \ | |
| { \ | |
| .version = -1, \ | |
| .is_bare = -1, \ | |
| .hash_algo = GIT_HASH_SHA1, \ | |
| .unknown_extensions = STRING_LIST_INIT_DUP, \ | |
| .v1_only_extensions = STRING_LIST_INIT_DUP, \ | |
| } | |
| /* | |
| * Read the repository format characteristics from the config file "path" into | |
| * "format" struct. Returns the numeric version. On error, or if no version is | |
| * found in the configuration, -1 is returned, format->version is set to -1, | |
| * and all other fields in the struct are set to the default configuration | |
| * (REPOSITORY_FORMAT_INIT). Always initialize the struct using | |
| * REPOSITORY_FORMAT_INIT before calling this function. | |
| */ | |
| int read_repository_format(struct repository_format *format, const char *path); | |
| /* | |
| * Free the memory held onto by `format`, but not the struct itself. | |
| * (No need to use this after `read_repository_format()` fails.) | |
| */ | |
| void clear_repository_format(struct repository_format *format); | |
| /* | |
| * Verify that the repository described by repository_format is something we | |
| * can read. If it is, return 0. Otherwise, return -1, and "err" will describe | |
| * any errors encountered. | |
| */ | |
| int verify_repository_format(const struct repository_format *format, | |
| struct strbuf *err); | |
| /* | |
| * Check the repository format version in the path found in get_git_dir(), | |
| * and die if it is a version we don't understand. Generally one would | |
| * set_git_dir() before calling this, and use it only for "are we in a valid | |
| * repo?". | |
| * | |
| * If successful and fmt is not NULL, fill fmt with data. | |
| */ | |
| void check_repository_format(struct repository_format *fmt); | |
| #define MTIME_CHANGED 0x0001 | |
| #define CTIME_CHANGED 0x0002 | |
| #define OWNER_CHANGED 0x0004 | |
| #define MODE_CHANGED 0x0008 | |
| #define INODE_CHANGED 0x0010 | |
| #define DATA_CHANGED 0x0020 | |
| #define TYPE_CHANGED 0x0040 | |
| /* | |
| * Return an abbreviated sha1 unique within this repository's object database. | |
| * The result will be at least `len` characters long, and will be NUL | |
| * terminated. | |
| * | |
| * The non-`_r` version returns a static buffer which remains valid until 4 | |
| * more calls to find_unique_abbrev are made. | |
| * | |
| * The `_r` variant writes to a buffer supplied by the caller, which must be at | |
| * least `GIT_MAX_HEXSZ + 1` bytes. The return value is the number of bytes | |
| * written (excluding the NUL terminator). | |
| * | |
| * Note that while this version avoids the static buffer, it is not fully | |
| * reentrant, as it calls into other non-reentrant git code. | |
| */ | |
| const char *repo_find_unique_abbrev(struct repository *r, const struct object_id *oid, int len); | |
| #define find_unique_abbrev(oid, len) repo_find_unique_abbrev(the_repository, oid, len) | |
| int repo_find_unique_abbrev_r(struct repository *r, char *hex, const struct object_id *oid, int len); | |
| #define find_unique_abbrev_r(hex, oid, len) repo_find_unique_abbrev_r(the_repository, hex, oid, len) | |
| /* set default permissions by passing mode arguments to open(2) */ | |
| int git_mkstemps_mode(char *pattern, int suffix_len, int mode); | |
| int git_mkstemp_mode(char *pattern, int mode); | |
| /* | |
| * NOTE NOTE NOTE!! | |
| * | |
| * PERM_UMASK, OLD_PERM_GROUP and OLD_PERM_EVERYBODY enumerations must | |
| * not be changed. Old repositories have core.sharedrepository written in | |
| * numeric format, and therefore these values are preserved for compatibility | |
| * reasons. | |
| */ | |
| enum sharedrepo { | |
| PERM_UMASK = 0, | |
| OLD_PERM_GROUP = 1, | |
| OLD_PERM_EVERYBODY = 2, | |
| PERM_GROUP = 0660, | |
| PERM_EVERYBODY = 0664 | |
| }; | |
| int git_config_perm(const char *var, const char *value); | |
| int adjust_shared_perm(const char *path); | |
| /* | |
| * Create the directory containing the named path, using care to be | |
| * somewhat safe against races. Return one of the scld_error values to | |
| * indicate success/failure. On error, set errno to describe the | |
| * problem. | |
| * | |
| * SCLD_VANISHED indicates that one of the ancestor directories of the | |
| * path existed at one point during the function call and then | |
| * suddenly vanished, probably because another process pruned the | |
| * directory while we were working. To be robust against this kind of | |
| * race, callers might want to try invoking the function again when it | |
| * returns SCLD_VANISHED. | |
| * | |
| * safe_create_leading_directories() temporarily changes path while it | |
| * is working but restores it before returning. | |
| * safe_create_leading_directories_const() doesn't modify path, even | |
| * temporarily. Both these variants adjust the permissions of the | |
| * created directories to honor core.sharedRepository, so they are best | |
| * suited for files inside the git dir. For working tree files, use | |
| * safe_create_leading_directories_no_share() instead, as it ignores | |
| * the core.sharedRepository setting. | |
| */ | |
| enum scld_error { | |
| SCLD_OK = 0, | |
| SCLD_FAILED = -1, | |
| SCLD_PERMS = -2, | |
| SCLD_EXISTS = -3, | |
| SCLD_VANISHED = -4 | |
| }; | |
| enum scld_error safe_create_leading_directories(char *path); | |
| enum scld_error safe_create_leading_directories_const(const char *path); | |
| enum scld_error safe_create_leading_directories_no_share(char *path); | |
| /* | |
| * Callback function for raceproof_create_file(). This function is | |
| * expected to do something that makes dirname(path) permanent despite | |
| * the fact that other processes might be cleaning up empty | |
| * directories at the same time. Usually it will create a file named | |
| * path, but alternatively it could create another file in that | |
| * directory, or even chdir() into that directory. The function should | |
| * return 0 if the action was completed successfully. On error, it | |
| * should return a nonzero result and set errno. | |
| * raceproof_create_file() treats two errno values specially: | |
| * | |
| * - ENOENT -- dirname(path) does not exist. In this case, | |
| * raceproof_create_file() tries creating dirname(path) | |
| * (and any parent directories, if necessary) and calls | |
| * the function again. | |
| * | |
| * - EISDIR -- the file already exists and is a directory. In this | |
| * case, raceproof_create_file() removes the directory if | |
| * it is empty (and recursively any empty directories that | |
| * it contains) and calls the function again. | |
| * | |
| * Any other errno causes raceproof_create_file() to fail with the | |
| * callback's return value and errno. | |
| * | |
| * Obviously, this function should be OK with being called again if it | |
| * fails with ENOENT or EISDIR. In other scenarios it will not be | |
| * called again. | |
| */ | |
| typedef int create_file_fn(const char *path, void *cb); | |
| /* | |
| * Create a file in dirname(path) by calling fn, creating leading | |
| * directories if necessary. Retry a few times in case we are racing | |
| * with another process that is trying to clean up the directory that | |
| * contains path. See the documentation for create_file_fn for more | |
| * details. | |
| * | |
| * Return the value and set the errno that resulted from the most | |
| * recent call of fn. fn is always called at least once, and will be | |
| * called more than once if it returns ENOENT or EISDIR. | |
| */ | |
| int raceproof_create_file(const char *path, create_file_fn fn, void *cb); | |
| int mkdir_in_gitdir(const char *path); | |
| char *expand_user_path(const char *path, int real_home); | |
| const char *enter_repo(const char *path, int strict); | |
| static inline int is_absolute_path(const char *path) | |
| { | |
| return is_dir_sep(path[0]) || has_dos_drive_prefix(path); | |
| } | |
| int is_directory(const char *); | |
| char *strbuf_realpath(struct strbuf *resolved, const char *path, | |
| int die_on_error); | |
| char *strbuf_realpath_forgiving(struct strbuf *resolved, const char *path, | |
| int die_on_error); | |
| char *real_pathdup(const char *path, int die_on_error); | |
| const char *absolute_path(const char *path); | |
| char *absolute_pathdup(const char *path); | |
| const char *remove_leading_path(const char *in, const char *prefix); | |
| const char *relative_path(const char *in, const char *prefix, struct strbuf *sb); | |
| int normalize_path_copy_len(char *dst, const char *src, int *prefix_len); | |
| int normalize_path_copy(char *dst, const char *src); | |
| int longest_ancestor_length(const char *path, struct string_list *prefixes); | |
| char *strip_path_suffix(const char *path, const char *suffix); | |
| int daemon_avoid_alias(const char *path); | |
| /* | |
| * These functions match their is_hfs_dotgit() counterparts; see utf8.h for | |
| * details. | |
| */ | |
| int is_ntfs_dotgit(const char *name); | |
| int is_ntfs_dotgitmodules(const char *name); | |
| int is_ntfs_dotgitignore(const char *name); | |
| int is_ntfs_dotgitattributes(const char *name); | |
| int is_ntfs_dotmailmap(const char *name); | |
| /* | |
| * Returns true iff "str" could be confused as a command-line option when | |
| * passed to a sub-program like "ssh". Note that this has nothing to do with | |
| * shell-quoting, which should be handled separately; we're assuming here that | |
| * the string makes it verbatim to the sub-program. | |
| */ | |
| int looks_like_command_line_option(const char *str); | |
| /** | |
| * Return a newly allocated string with the evaluation of | |
| * "$XDG_CONFIG_HOME/git/$filename" if $XDG_CONFIG_HOME is non-empty, otherwise | |
| * "$HOME/.config/git/$filename". Return NULL upon error. | |
| */ | |
| char *xdg_config_home(const char *filename); | |
| /** | |
| * Return a newly allocated string with the evaluation of | |
| * "$XDG_CACHE_HOME/git/$filename" if $XDG_CACHE_HOME is non-empty, otherwise | |
| * "$HOME/.cache/git/$filename". Return NULL upon error. | |
| */ | |
| char *xdg_cache_home(const char *filename); | |
| int git_open_cloexec(const char *name, int flags); | |
| #define git_open(name) git_open_cloexec(name, O_RDONLY) | |
| int unpack_loose_header(git_zstream *stream, unsigned char *map, unsigned long mapsize, void *buffer, unsigned long bufsiz); | |
| int parse_loose_header(const char *hdr, unsigned long *sizep); | |
| int check_object_signature(struct repository *r, const struct object_id *oid, | |
| void *buf, unsigned long size, const char *type); | |
| int finalize_object_file(const char *tmpfile, const char *filename); | |
| /* Helper to check and "touch" a file */ | |
| int check_and_freshen_file(const char *fn, int freshen); | |
| extern const signed char hexval_table[256]; | |
| static inline unsigned int hexval(unsigned char c) | |
| { | |
| return hexval_table[c]; | |
| } | |
| /* | |
| * Convert two consecutive hexadecimal digits into a char. Return a | |
| * negative value on error. Don't run over the end of short strings. | |
| */ | |
| static inline int hex2chr(const char *s) | |
| { | |
| unsigned int val = hexval(s[0]); | |
| return (val & ~0xf) ? val : (val << 4) | hexval(s[1]); | |
| } | |
| /* Convert to/from hex/sha1 representation */ | |
| #define MINIMUM_ABBREV minimum_abbrev | |
| #define DEFAULT_ABBREV default_abbrev | |
| /* used when the code does not know or care what the default abbrev is */ | |
| #define FALLBACK_DEFAULT_ABBREV 7 | |
| struct object_context { | |
| unsigned short mode; | |
| /* | |
| * symlink_path is only used by get_tree_entry_follow_symlinks, | |
| * and only for symlinks that point outside the repository. | |
| */ | |
| struct strbuf symlink_path; | |
| /* | |
| * If GET_OID_RECORD_PATH is set, this will record path (if any) | |
| * found when resolving the name. The caller is responsible for | |
| * releasing the memory. | |
| */ | |
| char *path; | |
| }; | |
| #define GET_OID_QUIETLY 01 | |
| #define GET_OID_COMMIT 02 | |
| #define GET_OID_COMMITTISH 04 | |
| #define GET_OID_TREE 010 | |
| #define GET_OID_TREEISH 020 | |
| #define GET_OID_BLOB 040 | |
| #define GET_OID_FOLLOW_SYMLINKS 0100 | |
| #define GET_OID_RECORD_PATH 0200 | |
| #define GET_OID_ONLY_TO_DIE 04000 | |
| #define GET_OID_DISAMBIGUATORS \ | |
| (GET_OID_COMMIT | GET_OID_COMMITTISH | \ | |
| GET_OID_TREE | GET_OID_TREEISH | \ | |
| GET_OID_BLOB) | |
| enum get_oid_result { | |
| FOUND = 0, | |
| MISSING_OBJECT = -1, /* The requested object is missing */ | |
| SHORT_NAME_AMBIGUOUS = -2, | |
| /* The following only apply when symlinks are followed */ | |
| DANGLING_SYMLINK = -4, /* | |
| * The initial symlink is there, but | |
| * (transitively) points to a missing | |
| * in-tree file | |
| */ | |
| SYMLINK_LOOP = -5, | |
| NOT_DIR = -6, /* | |
| * Somewhere along the symlink chain, a path is | |
| * requested which contains a file as a | |
| * non-final element. | |
| */ | |
| }; | |
| int repo_get_oid(struct repository *r, const char *str, struct object_id *oid); | |
| int get_oidf(struct object_id *oid, const char *fmt, ...); | |
| int repo_get_oid_commit(struct repository *r, const char *str, struct object_id *oid); | |
| int repo_get_oid_committish(struct repository *r, const char *str, struct object_id *oid); | |
| int repo_get_oid_tree(struct repository *r, const char *str, struct object_id *oid); | |
| int repo_get_oid_treeish(struct repository *r, const char *str, struct object_id *oid); | |
| int repo_get_oid_blob(struct repository *r, const char *str, struct object_id *oid); | |
| int repo_get_oid_mb(struct repository *r, const char *str, struct object_id *oid); | |
| void maybe_die_on_misspelt_object_name(struct repository *repo, | |
| const char *name, | |
| const char *prefix); | |
| enum get_oid_result get_oid_with_context(struct repository *repo, const char *str, | |
| unsigned flags, struct object_id *oid, | |
| struct object_context *oc); | |
| #define get_oid(str, oid) repo_get_oid(the_repository, str, oid) | |
| #define get_oid_commit(str, oid) repo_get_oid_commit(the_repository, str, oid) | |
| #define get_oid_committish(str, oid) repo_get_oid_committish(the_repository, str, oid) | |
| #define get_oid_tree(str, oid) repo_get_oid_tree(the_repository, str, oid) | |
| #define get_oid_treeish(str, oid) repo_get_oid_treeish(the_repository, str, oid) | |
| #define get_oid_blob(str, oid) repo_get_oid_blob(the_repository, str, oid) | |
| #define get_oid_mb(str, oid) repo_get_oid_mb(the_repository, str, oid) | |
| typedef int each_abbrev_fn(const struct object_id *oid, void *); | |
| int repo_for_each_abbrev(struct repository *r, const char *prefix, each_abbrev_fn, void *); | |
| #define for_each_abbrev(prefix, fn, data) repo_for_each_abbrev(the_repository, prefix, fn, data) | |
| int set_disambiguate_hint_config(const char *var, const char *value); | |
| /* | |
| * Try to read a SHA1 in hexadecimal format from the 40 characters | |
| * starting at hex. Write the 20-byte result to sha1 in binary form. | |
| * Return 0 on success. Reading stops if a NUL is encountered in the | |
| * input, so it is safe to pass this function an arbitrary | |
| * null-terminated string. | |
| */ | |
| int get_sha1_hex(const char *hex, unsigned char *sha1); | |
| int get_oid_hex(const char *hex, struct object_id *sha1); | |
| /* Like get_oid_hex, but for an arbitrary hash algorithm. */ | |
| int get_oid_hex_algop(const char *hex, struct object_id *oid, const struct git_hash_algo *algop); | |
| /* | |
| * Read `len` pairs of hexadecimal digits from `hex` and write the | |
| * values to `binary` as `len` bytes. Return 0 on success, or -1 if | |
| * the input does not consist of hex digits). | |
| */ | |
| int hex_to_bytes(unsigned char *binary, const char *hex, size_t len); | |
| /* | |
| * Convert a binary hash in "unsigned char []" or an object name in | |
| * "struct object_id *" to its hex equivalent. The `_r` variant is reentrant, | |
| * and writes the NUL-terminated output to the buffer `out`, which must be at | |
| * least `GIT_MAX_HEXSZ + 1` bytes, and returns a pointer to out for | |
| * convenience. | |
| * | |
| * The non-`_r` variant returns a static buffer, but uses a ring of 4 | |
| * buffers, making it safe to make multiple calls for a single statement, like: | |
| * | |
| * printf("%s -> %s", hash_to_hex(one), hash_to_hex(two)); | |
| * printf("%s -> %s", oid_to_hex(one), oid_to_hex(two)); | |
| */ | |
| char *hash_to_hex_algop_r(char *buffer, const unsigned char *hash, const struct git_hash_algo *); | |
| char *oid_to_hex_r(char *out, const struct object_id *oid); | |
| char *hash_to_hex_algop(const unsigned char *hash, const struct git_hash_algo *); /* static buffer result! */ | |
| char *hash_to_hex(const unsigned char *hash); /* same static buffer */ | |
| char *oid_to_hex(const struct object_id *oid); /* same static buffer */ | |
| /* | |
| * Parse a 40-character hexadecimal object ID starting from hex, updating the | |
| * pointer specified by end when parsing stops. The resulting object ID is | |
| * stored in oid. Returns 0 on success. Parsing will stop on the first NUL or | |
| * other invalid character. end is only updated on success; otherwise, it is | |
| * unmodified. | |
| */ | |
| int parse_oid_hex(const char *hex, struct object_id *oid, const char **end); | |
| /* Like parse_oid_hex, but for an arbitrary hash algorithm. */ | |
| int parse_oid_hex_algop(const char *hex, struct object_id *oid, const char **end, | |
| const struct git_hash_algo *algo); | |
| /* | |
| * These functions work like get_oid_hex and parse_oid_hex, but they will parse | |
| * a hex value for any algorithm. The algorithm is detected based on the length | |
| * and the algorithm in use is returned. If this is not a hex object ID in any | |
| * algorithm, returns GIT_HASH_UNKNOWN. | |
| */ | |
| int get_oid_hex_any(const char *hex, struct object_id *oid); | |
| int parse_oid_hex_any(const char *hex, struct object_id *oid, const char **end); | |
| /* | |
| * This reads short-hand syntax that not only evaluates to a commit | |
| * object name, but also can act as if the end user spelled the name | |
| * of the branch from the command line. | |
| * | |
| * - "@{-N}" finds the name of the Nth previous branch we were on, and | |
| * places the name of the branch in the given buf and returns the | |
| * number of characters parsed if successful. | |
| * | |
| * - "<branch>@{upstream}" finds the name of the other ref that | |
| * <branch> is configured to merge with (missing <branch> defaults | |
| * to the current branch), and places the name of the branch in the | |
| * given buf and returns the number of characters parsed if | |
| * successful. | |
| * | |
| * If the input is not of the accepted format, it returns a negative | |
| * number to signal an error. | |
| * | |
| * If the input was ok but there are not N branch switches in the | |
| * reflog, it returns 0. | |
| */ | |
| #define INTERPRET_BRANCH_LOCAL (1<<0) | |
| #define INTERPRET_BRANCH_REMOTE (1<<1) | |
| #define INTERPRET_BRANCH_HEAD (1<<2) | |
| struct interpret_branch_name_options { | |
| /* | |
| * If "allowed" is non-zero, it is a treated as a bitfield of allowable | |
| * expansions: local branches ("refs/heads/"), remote branches | |
| * ("refs/remotes/"), or "HEAD". If no "allowed" bits are set, any expansion is | |
| * allowed, even ones to refs outside of those namespaces. | |
| */ | |
| unsigned allowed; | |
| /* | |
| * If ^{upstream} or ^{push} (or equivalent) is requested, and the | |
| * branch in question does not have such a reference, return -1 instead | |
| * of die()-ing. | |
| */ | |
| unsigned nonfatal_dangling_mark : 1; | |
| }; | |
| int repo_interpret_branch_name(struct repository *r, | |
| const char *str, int len, | |
| struct strbuf *buf, | |
| const struct interpret_branch_name_options *options); | |
| #define interpret_branch_name(str, len, buf, options) \ | |
| repo_interpret_branch_name(the_repository, str, len, buf, options) | |
| int validate_headref(const char *ref); | |
| int base_name_compare(const char *name1, int len1, int mode1, const char *name2, int len2, int mode2); | |
| int df_name_compare(const char *name1, int len1, int mode1, const char *name2, int len2, int mode2); | |
| int name_compare(const char *name1, size_t len1, const char *name2, size_t len2); | |
| int cache_name_stage_compare(const char *name1, int len1, int stage1, const char *name2, int len2, int stage2); | |
| void *read_object_with_reference(struct repository *r, | |
| const struct object_id *oid, | |
| const char *required_type, | |
| unsigned long *size, | |
| struct object_id *oid_ret); | |
| struct object *repo_peel_to_type(struct repository *r, | |
| const char *name, int namelen, | |
| struct object *o, enum object_type); | |
| #define peel_to_type(name, namelen, obj, type) \ | |
| repo_peel_to_type(the_repository, name, namelen, obj, type) | |
| enum date_mode_type { | |
| DATE_NORMAL = 0, | |
| DATE_HUMAN, | |
| DATE_RELATIVE, | |
| DATE_SHORT, | |
| DATE_ISO8601, | |
| DATE_ISO8601_STRICT, | |
| DATE_RFC2822, | |
| DATE_STRFTIME, | |
| DATE_RAW, | |
| DATE_UNIX | |
| }; | |
| struct date_mode { | |
| enum date_mode_type type; | |
| const char *strftime_fmt; | |
| int local; | |
| }; | |
| /* | |
| * Convenience helper for passing a constant type, like: | |
| * | |
| * show_date(t, tz, DATE_MODE(NORMAL)); | |
| */ | |
| #define DATE_MODE(t) date_mode_from_type(DATE_##t) | |
| struct date_mode *date_mode_from_type(enum date_mode_type type); | |
| const char *show_date(timestamp_t time, int timezone, const struct date_mode *mode); | |
| void show_date_relative(timestamp_t time, struct strbuf *timebuf); | |
| void show_date_human(timestamp_t time, int tz, const struct timeval *now, | |
| struct strbuf *timebuf); | |
| int parse_date(const char *date, struct strbuf *out); | |
| int parse_date_basic(const char *date, timestamp_t *timestamp, int *offset); | |
| int parse_expiry_date(const char *date, timestamp_t *timestamp); | |
| void datestamp(struct strbuf *out); | |
| #define approxidate(s) approxidate_careful((s), NULL) | |
| timestamp_t approxidate_careful(const char *, int *); | |
| timestamp_t approxidate_relative(const char *date); | |
| void parse_date_format(const char *format, struct date_mode *mode); | |
| int date_overflows(timestamp_t date); | |
| #define IDENT_STRICT 1 | |
| #define IDENT_NO_DATE 2 | |
| #define IDENT_NO_NAME 4 | |
| enum want_ident { | |
| WANT_BLANK_IDENT, | |
| WANT_AUTHOR_IDENT, | |
| WANT_COMMITTER_IDENT | |
| }; | |
| const char *git_author_info(int); | |
| const char *git_committer_info(int); | |
| const char *fmt_ident(const char *name, const char *email, | |
| enum want_ident whose_ident, | |
| const char *date_str, int); | |
| const char *fmt_name(enum want_ident); | |
| const char *ident_default_name(void); | |
| const char *ident_default_email(void); | |
| const char *git_editor(void); | |
| const char *git_sequence_editor(void); | |
| const char *git_pager(int stdout_is_tty); | |
| int is_terminal_dumb(void); | |
| int git_ident_config(const char *, const char *, void *); | |
| /* | |
| * Prepare an ident to fall back on if the user didn't configure it. | |
| */ | |
| void prepare_fallback_ident(const char *name, const char *email); | |
| void reset_ident_date(void); | |
| struct ident_split { | |
| const char *name_begin; | |
| const char *name_end; | |
| const char *mail_begin; | |
| const char *mail_end; | |
| const char *date_begin; | |
| const char *date_end; | |
| const char *tz_begin; | |
| const char *tz_end; | |
| }; | |
| /* | |
| * Signals an success with 0, but time part of the result may be NULL | |
| * if the input lacks timestamp and zone | |
| */ | |
| int split_ident_line(struct ident_split *, const char *, int); | |
| /* | |
| * Like show_date, but pull the timestamp and tz parameters from | |
| * the ident_split. It will also sanity-check the values and produce | |
| * a well-known sentinel date if they appear bogus. | |
| */ | |
| const char *show_ident_date(const struct ident_split *id, | |
| const struct date_mode *mode); | |
| /* | |
| * Compare split idents for equality or strict ordering. Note that we | |
| * compare only the ident part of the line, ignoring any timestamp. | |
| * | |
| * Because there are two fields, we must choose one as the primary key; we | |
| * currently arbitrarily pick the email. | |
| */ | |
| int ident_cmp(const struct ident_split *, const struct ident_split *); | |
| struct cache_def { | |
| struct strbuf path; | |
| int flags; | |
| int track_flags; | |
| int prefix_len_stat_func; | |
| }; | |
| #define CACHE_DEF_INIT { STRBUF_INIT, 0, 0, 0 } | |
| static inline void cache_def_clear(struct cache_def *cache) | |
| { | |
| strbuf_release(&cache->path); | |
| } | |
| int has_symlink_leading_path(const char *name, int len); | |
| int threaded_has_symlink_leading_path(struct cache_def *, const char *, int); | |
| int check_leading_path(const char *name, int len, int warn_on_lstat_err); | |
| int has_dirs_only_path(const char *name, int len, int prefix_len); | |
| void invalidate_lstat_cache(void); | |
| void schedule_dir_for_removal(const char *name, int len); | |
| void remove_scheduled_dirs(void); | |
| struct pack_window { | |
| struct pack_window *next; | |
| unsigned char *base; | |
| off_t offset; | |
| size_t len; | |
| unsigned int last_used; | |
| unsigned int inuse_cnt; | |
| }; | |
| struct pack_entry { | |
| off_t offset; | |
| struct packed_git *p; | |
| }; | |
| /* | |
| * Create a temporary file rooted in the object database directory, or | |
| * die on failure. The filename is taken from "pattern", which should have the | |
| * usual "XXXXXX" trailer, and the resulting filename is written into the | |
| * "template" buffer. Returns the open descriptor. | |
| */ | |
| int odb_mkstemp(struct strbuf *temp_filename, const char *pattern); | |
| /* | |
| * Create a pack .keep file named "name" (which should generally be the output | |
| * of odb_pack_name). Returns a file descriptor opened for writing, or -1 on | |
| * error. | |
| */ | |
| int odb_pack_keep(const char *name); | |
| /* | |
| * Set this to 0 to prevent oid_object_info_extended() from fetching missing | |
| * blobs. This has a difference only if extensions.partialClone is set. | |
| * | |
| * Its default value is 1. | |
| */ | |
| extern int fetch_if_missing; | |
| /* Dumb servers support */ | |
| int update_server_info(int); | |
| const char *get_log_output_encoding(void); | |
| const char *get_commit_output_encoding(void); | |
| /* | |
| * This is a hack for test programs like test-dump-untracked-cache to | |
| * ensure that they do not modify the untracked cache when reading it. | |
| * Do not use it otherwise! | |
| */ | |
| extern int ignore_untracked_cache_config; | |
| int committer_ident_sufficiently_given(void); | |
| int author_ident_sufficiently_given(void); | |
| extern const char *git_commit_encoding; | |
| extern const char *git_log_output_encoding; | |
| extern const char *git_mailmap_file; | |
| extern const char *git_mailmap_blob; | |
| /* IO helper functions */ | |
| void maybe_flush_or_die(FILE *, const char *); | |
| __attribute__((format (printf, 2, 3))) | |
| void fprintf_or_die(FILE *, const char *fmt, ...); | |
| #define COPY_READ_ERROR (-2) | |
| #define COPY_WRITE_ERROR (-3) | |
| int copy_fd(int ifd, int ofd); | |
| int copy_file(const char *dst, const char *src, int mode); | |
| int copy_file_with_time(const char *dst, const char *src, int mode); | |
| void write_or_die(int fd, const void *buf, size_t count); | |
| void fsync_or_die(int fd, const char *); | |
| ssize_t read_in_full(int fd, void *buf, size_t count); | |
| ssize_t write_in_full(int fd, const void *buf, size_t count); | |
| ssize_t pread_in_full(int fd, void *buf, size_t count, off_t offset); | |
| static inline ssize_t write_str_in_full(int fd, const char *str) | |
| { | |
| return write_in_full(fd, str, strlen(str)); | |
| } | |
| /** | |
| * Open (and truncate) the file at path, write the contents of buf to it, | |
| * and close it. Dies if any errors are encountered. | |
| */ | |
| void write_file_buf(const char *path, const char *buf, size_t len); | |
| /** | |
| * Like write_file_buf(), but format the contents into a buffer first. | |
| * Additionally, write_file() will append a newline if one is not already | |
| * present, making it convenient to write text files: | |
| * | |
| * write_file(path, "counter: %d", ctr); | |
| */ | |
| __attribute__((format (printf, 2, 3))) | |
| void write_file(const char *path, const char *fmt, ...); | |
| /* pager.c */ | |
| void setup_pager(void); | |
| int pager_in_use(void); | |
| extern int pager_use_color; | |
| int term_columns(void); | |
| void term_clear_line(void); | |
| int decimal_width(uintmax_t); | |
| int check_pager_config(const char *cmd); | |
| void prepare_pager_args(struct child_process *, const char *pager); | |
| extern const char *editor_program; | |
| extern const char *askpass_program; | |
| extern const char *excludes_file; | |
| /* base85 */ | |
| int decode_85(char *dst, const char *line, int linelen); | |
| void encode_85(char *buf, const unsigned char *data, int bytes); | |
| /* pkt-line.c */ | |
| void packet_trace_identity(const char *prog); | |
| /* add */ | |
| /* | |
| * return 0 if success, 1 - if addition of a file failed and | |
| * ADD_FILES_IGNORE_ERRORS was specified in flags | |
| */ | |
| int add_files_to_cache(const char *prefix, const struct pathspec *pathspec, int flags); | |
| /* diff.c */ | |
| extern int diff_auto_refresh_index; | |
| /* match-trees.c */ | |
| void shift_tree(struct repository *, const struct object_id *, const struct object_id *, struct object_id *, int); | |
| void shift_tree_by(struct repository *, const struct object_id *, const struct object_id *, struct object_id *, const char *); | |
| /* | |
| * whitespace rules. | |
| * used by both diff and apply | |
| * last two digits are tab width | |
| */ | |
| #define WS_BLANK_AT_EOL 0100 | |
| #define WS_SPACE_BEFORE_TAB 0200 | |
| #define WS_INDENT_WITH_NON_TAB 0400 | |
| #define WS_CR_AT_EOL 01000 | |
| #define WS_BLANK_AT_EOF 02000 | |
| #define WS_TAB_IN_INDENT 04000 | |
| #define WS_TRAILING_SPACE (WS_BLANK_AT_EOL|WS_BLANK_AT_EOF) | |
| #define WS_DEFAULT_RULE (WS_TRAILING_SPACE|WS_SPACE_BEFORE_TAB|8) | |
| #define WS_TAB_WIDTH_MASK 077 | |
| /* All WS_* -- when extended, adapt diff.c emit_symbol */ | |
| #define WS_RULE_MASK 07777 | |
| extern unsigned whitespace_rule_cfg; | |
| unsigned whitespace_rule(struct index_state *, const char *); | |
| unsigned parse_whitespace_rule(const char *); | |
| unsigned ws_check(const char *line, int len, unsigned ws_rule); | |
| void ws_check_emit(const char *line, int len, unsigned ws_rule, FILE *stream, const char *set, const char *reset, const char *ws); | |
| char *whitespace_error_string(unsigned ws); | |
| void ws_fix_copy(struct strbuf *, const char *, int, unsigned, int *); | |
| int ws_blank_line(const char *line, int len, unsigned ws_rule); | |
| #define ws_tab_width(rule) ((rule) & WS_TAB_WIDTH_MASK) | |
| /* ls-files */ | |
| void overlay_tree_on_index(struct index_state *istate, | |
| const char *tree_name, const char *prefix); | |
| /* setup.c */ | |
| struct startup_info { | |
| int have_repository; | |
| const char *prefix; | |
| }; | |
| extern struct startup_info *startup_info; | |
| /* merge.c */ | |
| struct commit_list; | |
| int try_merge_command(struct repository *r, | |
| const char *strategy, size_t xopts_nr, | |
| const char **xopts, struct commit_list *common, | |
| const char *head_arg, struct commit_list *remotes); | |
| int checkout_fast_forward(struct repository *r, | |
| const struct object_id *from, | |
| const struct object_id *to, | |
| int overwrite_ignore); | |
| int sane_execvp(const char *file, char *const argv[]); | |
| /* | |
| * A struct to encapsulate the concept of whether a file has changed | |
| * since we last checked it. This uses criteria similar to those used | |
| * for the index. | |
| */ | |
| struct stat_validity { | |
| struct stat_data *sd; | |
| }; | |
| void stat_validity_clear(struct stat_validity *sv); | |
| /* | |
| * Returns 1 if the path is a regular file (or a symlink to a regular | |
| * file) and matches the saved stat_validity, 0 otherwise. A missing | |
| * or inaccessible file is considered a match if the struct was just | |
| * initialized, or if the previous update found an inaccessible file. | |
| */ | |
| int stat_validity_check(struct stat_validity *sv, const char *path); | |
| /* | |
| * Update the stat_validity from a file opened at descriptor fd. If | |
| * the file is missing, inaccessible, or not a regular file, then | |
| * future calls to stat_validity_check will match iff one of those | |
| * conditions continues to be true. | |
| */ | |
| void stat_validity_update(struct stat_validity *sv, int fd); | |
| int versioncmp(const char *s1, const char *s2); | |
| /* | |
| * Create a directory and (if share is nonzero) adjust its permissions | |
| * according to the shared_repository setting. Only use this for | |
| * directories under $GIT_DIR. Don't use it for working tree | |
| * directories. | |
| */ | |
| void safe_create_dir(const char *dir, int share); | |
| /* | |
| * Should we print an ellipsis after an abbreviated SHA-1 value | |
| * when doing diff-raw output or indicating a detached HEAD? | |
| */ | |
| int print_sha1_ellipsis(void); | |
| /* Return 1 if the file is empty or does not exists, 0 otherwise. */ | |
| int is_empty_or_missing_file(const char *filename); | |
| #endif /* CACHE_H */ |