Comments for armbian

Comment on Cubietruck by Igor Pečovnik

Igor Pečovnik — Sat, 23 May 2015 10:53:18 +0000

Download latest image (v3.8 21.5.2015). This issue should be fixed.

Comment on Cubietruck by Mike Walter

Mike Walter — Sat, 23 May 2015 10:48:01 +0000

I have the same problems here. Downloaded the Jessie-image. The CT boots till “Welcome to Debian Jessie (8)” but nothing more. After some time (about 30seconds to a minute) two messages are shown:
“Timed out waiting for device dev-ttyS0.device” and “Dependency failed for Serial Getty on ttyS0”
This repeats all 30-60 seconds.
Any Idea?

Comment on Olimex Lime 1 by Igor Pečovnik

Igor Pečovnik — Sat, 23 May 2015 10:05:27 +0000

Rotation is working in 3.4.x kernel for sure but never tried with 4.x yet … I added CONFIG_FRAMEBUFFER_CONSOLE_ROTATION to kernel configuration.

Comment on Cubietruck by CubieboardUser

CubieboardUser — Sat, 23 May 2015 09:24:54 +0000

Hi, i tried to install debian jessy, then i installed desktop environment following your instruction, but i have a problem, when i leave my desktop without use it for some minutes, it switch of my monitor and if i try to use keyboard or mouse it doesn’t nothing and i need to reboot, i think some problem with energy save.. or something like this, do you have some solution?
Thanks!

Comment on Olimex Lime 1 by George

George — Sat, 23 May 2015 06:38:03 +0000

PS – is there way to rotate not only text console but all graphical x-screens? xrandr seems to fail

Comment on Olimex Lime 1 by George

George — Sat, 23 May 2015 05:44:36 +0000

Could you PLEASE enable CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y in next build of

Olimex Lime 2 / Debian jessie / 4.X ?

(and may be in other release branches too?)

I have physically rotated monitor and non-working

echo 3 > /sys/class/graphics/fbcon/rotate

is really a pain in the neck.

Thank you!

Comment on Orange Pi A20 by driv3l

driv3l — Sat, 23 May 2015 03:03:36 +0000

Igor,

Don’t know if you’ve seen this… but it seems there are some patches for H3 (Orange Pi Plus) support

http://thread.gmane.org/gmane.comp.hardware.netbook.arm.sunxi/16818

Comment on Banana Pi by lu

lu — Fri, 22 May 2015 15:37:24 +0000

Same problem here. LANGUAGE stays en_US and LC_MESSAGES stays posix. I configured them manually (update-locale LANGUAGE=de_DE.UTF-8 LC_MESSAGES=de_DE.UTF-8) and locales are right (all de_DE.UTF-8) now but german Umlauts still don’t work. I could live with that but also line drawing graphics in Midnight Commander and Aptitude don’t work which renders those programms unusable :-(.

Comment on Udoo quad by punk45rock

punk45rock — Fri, 22 May 2015 12:06:53 +0000

Hi I got the gpio pins activated with a shell script I wrote that is run by systemd at boot. The kernel Dev pointed how to activate the pins in your thread in UDOO forums. The only issue I am having now is the arduino ide complaining about not being able to find the serial port for the onboard arduino. Thank you for these amazing images. I have used my UDOO more in the last 2 weeks (since finding your images) than I have since I bought it over a year ago!

Comment on Cubietruck by Klaus

Klaus — Fri, 22 May 2015 08:31:29 +0000

ok, i found it. I have to change the boot.cmd