controller

(redirected from Controllers)
Also found in: Dictionary, Thesaurus, Legal, Financial, Acronyms.
Related to Controllers: Microcontrollers

controller

the equipment concerned with controlling the operation of an electrical device
Collins Discovery Encyclopedia, 1st edition © HarperCollins Publishers 2005

controller

[kən′trōl·ər]
(control systems)
McGraw-Hill Dictionary of Scientific & Technical Terms, 6E, Copyright © 2003 by The McGraw-Hill Companies, Inc.

controller

An electric device (or combination of devices) designed to initiate one or more functions of operation, such as starting, stopping, reversing, and speed changing, of the apparatus to which it is connected; operation may be manual or automatic.
McGraw-Hill Dictionary of Architecture and Construction. Copyright © 2003 by McGraw-Hill Companies, Inc.

controller

A person authorized to provide air traffic control services. The term also refers to radar controllers employed either on air traffic or air defense duties.
An Illustrated Dictionary of Aviation Copyright © 2005 by The McGraw-Hill Companies, Inc. All rights reserved

controller

(hardware)
Part of a computer, typically a separate circuit board, which allows the computer to use certain kinds of peripheral devices. A disk controller is used to connect hard disks and floppy disks, a network controller is used for Ethernet. Other controllers are: keyboard controller, interrupt controller and graphics controller.
This article is provided by FOLDOC - Free Online Dictionary of Computing (foldoc.org)
The following article is from The Great Soviet Encyclopedia (1979). It might be outdated or ideologically biased.

Controller

 

a low-voltage electrical device used for starting, speed regulation, reversing, and electric braking of DC and AC motors. It varies the electrical resistance in a control circuit and the connections in the power and excitation circuits of motors. Controllers are usually operated by means of a manual lever or a handwheel; servomotors are used for remote control.

Controllers are built as multistage flat, drum, or cam-operated contact switches. Flat controllers are mainly used where a large number of switching steps are required, as in the starting and regulation of electric motors up to 30–40 kilowatts (kW) in power. Drum controllers are used more often than other types for the direct control of DC motors up to 45 kW and AC motors up to 75 kW in power. As the drum is turned, segmented copper contacts touch fixed contacts, establishing different connections in the motor’s control circuits. For the control of high-powered electric motors where a large number of switching operations occur (up to 600 per hour), greater reliability is obtained with cam-operated controllers having rolling contacts, which provide greater wear resistance than sliding contacts.

REFERENCES

Babikov, M. A. Elektricheskie apparaty, part 2. Moscow-Leningrad, 1956.
Chunikhin, A. A. Elektricheskie apparaty. Moscow, 1967.

V. K. IVANOV

The Great Soviet Encyclopedia, 3rd Edition (1970-1979). © 2010 The Gale Group, Inc. All rights reserved.
References in periodicals archive ?
Controllers typically have one or two SCSI channels, each supporting a maximum of 270 MB/s.
The lime kiln depicted is controlled using a multi-variable model predictive controller with a linear programming optimizer.
In addition to training and technology improvements, we must also continue to adapt our doctrine to ensure that the remarkable effects combat controllers produce are developed to their fullest potential.
If one of the three drives is actually removed, a RAID controller recreates the missing data in realtime, based on the bits of data remaining on the other two drives.
* Most controllers still are placing primary emphasis on fulfilling their traditional functions, leaving little time for the kinds of strategic initiatives that would encourage management to accept them as business partners.
Complete family of temperature controllers, monitors, sensors and solid-state relays.
Featured here are highlights for the CFO, treasurer and controller positions.
Asked about the long delay, the official said that education department had moved separate summaries to the chief minister for the appointment of the chairmen and controllers.
Organisations may proceed on the basis that their relationship is controller to processor only to find, on analysis, that they are in fact both acting as controllers in the processing.

Full browser ?