DAMP

(redirected from Driver Amplifier)
AcronymDefinition
DAMPDeficits in Attention, Motor Control and Perception
DAMPDeclarative Aspects of Multicore Programming
DAMPDrainage Area Management Plan
DAMPDriver Amplifier
DAMPDanger-Associated Molecular Pattern (immunology)
DAMPDeoxyadenosine-5'-Monophosphate (nucleotide)
DAMPDynamique et Adsorption dans les Matériaux Poreux (French: Dynamic Adsorption in Porous Materials)
DAMPDownrange Antimissile Measurement Program
DAMPDGM Antenna Mast Program
DAMPDemand Analysis Manufacturing Planning
DAMPDefense Acquisition Management Policy
DAMPDefense Acquisition Management Process
DAMPDefense Acquisition Management Procedure
Copyright 1988-2018 AcronymFinder.com, All rights reserved.
References in periodicals archive ?
The driver amplifier is the same as the design in Section 2.
Design of linearity improved asymmetrical GaN Doherty power amplifier using composite right/left-handed transmission lines
This driver amplifier covers a broad frequency range of 250 to 3000 MHz with excellent linearity of 47 dBm output IP3 and typical gain of 19.5 dB.
Broadband Amplifier Showcases Linearity In Plastic Surface Mount Package
The pulsed operation of the C-band driver amplifier was simulated by applying a 1-millisecond pulse followed by a 3-millisecond pause.
Thermal technique tests GaAs
Top and bottom plenum chambers contain the control circuit, the driver amplifier module, and prime-power conditioning circuits.
Using reliability growth to aid qualification testing: follow a real product through MIL-STD-810E testing to see how reliability growth contributes to a successful design
These losses instead increase the gain requirement of the amplifiers or necessitate a driver amplifier at the antenna input.
Phased array antennas
The GaAs MMIC three-stage balanced power amplifier (model 44MPA0478) and the three-stage driver amplifier (model 44MPA0470) use 0.15 micron gate length GaAs PHEMT device model technology.
Power and driver amplifiers
The multi-level plating (MLP) process has been used to develop a family of wideband, low noise, generic gain block and driver amplifier MMICs operating up to 20 GHz.
High performance wideband MSAG gain block/driver amplifier MMICs using MLP technology
The average power and PAE of the three-stage driver amplifier are shown in Figure 6.
High voltage, low cost FETs for HPA MMIC applications
Acronyms browser ?
Full browser ?